Variation of the stress intensity factor along the front of a 3-D rectangular crack subjected to mixed-mode load

Summary  The singular integral equation method is applied to the calculation of the stress intensity factor at the front of a rectangular crack subjected to mixed-mode load. The stress field induced by a body force doublet is used as a fundamental solution. The problem is formulated as a system of integral equations with r ⁻³-singularities. In solving the integral equations, unknown functions of body-force densities are approximated by the product of polynomial and fundamental densities. The fundamental densities are chosen to express two-dimensional cracks in an infinite body for the limiting cases of the aspect ratio of the rectangle. The present method yields rapidly converging numerical results and satisfies boundary conditions all over the crack boundary. A smooth distribution of the stress intensity factor along the crack front is presented for various crack shapes and different Poisson's ratio. Received 5 March 2002; accepted for publication 2 July 2002     

Velocity profile measurement by ultrasonic doppler method

The ultrasonic velocity profile measuring method has been developed at PSI for application in fluid mechanics and fluid flow measurement. It uses pulsed ultrasonic echography together with the detection of the instantaneous Doppler shift frequency. This method has the following advantages over the conventional techniques: (1) an efficient flow mapping process, (2) applicability to opaque liquids, and (3) a record of the spatiotemporal velocity field. After a brief introduction of its principle, the characteristics and specifications of the present system are given. Then examples in fluid engineering for oscillating pipe flow, T-branching flow of mercury, and recirculating flow in a square cavity are described that confirm the method's advantages. Several other works under way by other investigators are introduced. A potential for in-depth study of fluid dynamics is demonstrated by several examples from an investigation of modulated wavy flows in a rotating Couette system. The position-averaged power spectrum and the time-averaged energy spectral density were used to study the dynamic characteristics of the flow, and subsequently the velocity field was decomposed into its intrinsic wave structure based on two-dimensional Fourier analysis.     

Axisymmetric impingement of a hot jet on a flat plate: equilibrium flow analysis of high-temperature air

The flow structure of an underexpanded supersonic jet with high reservoir temperature impinging on a flat plate has been numerically investigated using a Total Variation Diminishing (TVD) scheme. When the temperature of the flow field is high enough to cause chemical reaction, the specific heat ratio,, is no longer equal to 1.4, nor constant. This explains the difference found in the literature between the flow properties of the calorically perfect gas and that of the chemically reacting flow. Under the equilibrium flow assumption the effect of high temperature gas on the impinging jet has been taken into account in the present paper by using specific heat ratio and speed of sound given by correlation polynomials of thermodynamic variables. The limiting case of cold jet calculation in the present numerical results agreed well with the existing experimental data. For the equilibrium jet with high reservoir temperature,T _o=1000K, qualitative support of the present result has been provided by means of the approximation theory.This article was processed using Springer-Verlag T_EX Shock Waves macro package 1.0 and the AMS fonts, developed by the American Mathematical Society.     

Topological Effect on the Structure of Self‐Assembled Aggregates from Amphiphilic Macromolecules in Solution

The self‐assembled morphologies of cyclic amphiphiles, which are composed of a long hydrophobic block and a short hydrophilic block, in selective solutions are studied by using a simulated annealing method. The morphological dependence of the aggregates on solvent quality is investigated. The topology effects are studied by comparing results from linear counterparts of the amphiphiles. It is observed that, in addition to spherical micelles, cylindrical micelles, disklike micelles, vesicles, and large compound micelles, muticompartment vesicles with several fluidic cores can be formed by the cyclic systems. The morphologies are regulated by the interaction parameter ε_AS between the hydrophobic block and solvents. Furthermore, it is revealed that the differences of characteristics of the self‐assembled aggregates originate from the difference in architectural constraint. The wide region of forming multicompartment vesicles suggests that cyclic amphiphilic macromolecules could be a suitable candidate for applications to deliver multiple functional components by compartmentalizing different components in different confined space of vesicles.     

Out of the blue: semiconductor laser pumped visible rare‐earth doped lasers

The rise of semiconductor‐based pump sources such as In_xGa_1‐xN‐laser diodes or frequency‐doubled optically pumped semiconductor lasers with emission wavelengths in the blue encourages a revisitation of the rare‐earth ions Pr³⁺, Sm³⁺, Tb³⁺, Dy³⁺, Ho³⁺ and Er³⁺ with respect to their properties as active ions in crystalline solid‐state laser materials with direct emission in the visible spectral range. Nowadays, some of these blue‐pumped visible lasers compete with Nd³⁺‐lasers in terms of efficiency and direct lasing at various colors from the cyan‐blue to the deep red can be addressed in very simple and compact laser setups. This paper highlights the spectroscopic properties of suitable rare‐earth ions for visible lasing and reviews the latest progress in the field of blue‐pumped visible rare‐earth doped solid‐state lasers.

     

Surface plasmon polariton assisted optical pulling force

We demonstrate both analytically and numerically the existence of optical pulling forces acting on particles located near plasmonic interfaces. Two main factors contribute to the appearance of this negative recoil force. The interference between the incident and reflected waves induces a rotating dipole with an asymmetric scattering pattern, while the directional excitation of surface plasmon polaritons (SPPs) enhances the linear momentum of scattered light. The strongly asymmetric SPP excitation is determined by spin–orbit coupling of the rotating dipole and surface plasmon polariton. As a result of the total momentum conservation, the force acting on the particle points in a direction opposite to the incident wave propagation. We derive analytical expressions for the force acting on dipolar particles placed in the proximity of plasmonic surfaces. Analytical expressions for this pulling force are derived within the dipole approximation and are in excellent agreement with results of electromagnetic numerical calculations. The forces acting on larger particles are analyzed numerically, beyond the dipole approximation.

     

Deterministic separation of arbitrary photon pair states in integrated quantum circuits

Entangled photon pairs must often be spatially separated for their subsequent manipulation in integrated quantum circuits. Separation that is both deterministic and universal can in principle be achieved through anti‐coalescent two‐photon quantum interference. However, such interference‐facilitated pair separation (IFPS) has not been extensively studied in the integrated setting, which has important implications on performance. This work provides a detailed review of IFPS and examines how integrated device dependencies such as dispersion impact separation fidelity and interference visibility. The analysis applies equally to both on‐chip and in‐fiber implementations. When coupler dispersion is present, the separation performance can depend on photon bandwidth, spectral entanglement and the dispersion. By design, reduction in the separation fidelity due to loss of non‐classical interference can be perfectly compensated for by classical wavelength demultiplexing effects. This work informs the design of devices for universal photon pair separation of states with tunable arbitrary properties.

     

Sustained photon pulse revivals from inhomogeneously broadened spin ensembles

A very promising recent trend in applied quantum physics is to combine the advantageous features of different quantum systems into what is called “hybrid quantum technology”. One of the key elements in this new field will have to be a quantum memory enabling to store quanta over extended periods of time. Systems that may fulfill the demands of such applications are comb‐shaped spin ensembles coupled to a cavity. Due to the decoherence induced by the inhomogeneous ensemble broadening, the storage time of these quantum memories is, however, still rather limited. Here we demonstrate how to overcome this problem by burning well‐placed holes into the spectral spin density leading to spectacular performance in the multimode regime. Specifically, we show how an initial excitation of the ensemble leads to the emission of more than a hundred well‐separated photon pulses with a decay rate significantly below the fundamental limit of the recently proposed “cavity protection effect”.

     

GaAs pyramidal quantum dot coupled to wetting layer in an AlGaAs matrix: A strain-free system

In this contribution, the electronic and linear and nonlinear optical properties of pyramid-shaped GaAs quantum dots (QDs) coupled to wetting layer (WL) in an Al_0.3Ga_0.7As matrix have been investigated. This nanostructure is relaxed from strain effects due to very small lattice-mismatching. Three transitions of P-to-S, WL-to-P, and WL-to-S were considered and the corresponding transition dipole moments, oscillator strengths, and linear and nonlinear optical properties regarding to these transitions were investigated as a function of the QD height. The results showed that for P-to-S transition, which is a purely in-plane-polarized transition, the dependence of electronic and optical properties on the size is moderate and can be neglected. But for WL-to-P and WL-to-S transitions, which are in-plane- and z-polarized transitions, respectively, the electronic as well as optical properties are strongly size-dependent. Furthermore, a competition between WL-to-S and WL-to-P transitions was observed when the QD size changed.     

Physical reasons of emission transformation in infrared CdSeTe/ZnS quantum dots at bioconjugation

The core/shell CdSeTe/ZnS quantum dots (QDs) with emission at 780–800 nm (1.55–1.60 eV) have been studied by means of photoluminescence (PL) and Raman scattering methods in the nonconjugated state and after conjugation to different antibodies (Ab): (i) mouse monoclonal [8C9] human papilloma virus Ab, anti-HPV 16-E7 Ab, (ii) mouse monoclonal [C1P5] human papilloma virus HPV16 E6+HPV18 E6 Ab, and (iii) pseudo rabies virus (PRV) Ab. The transformations of PL and Raman scattering spectra of QDs, stimulated by conjugated antibodies, have been revealed and discussed.The energy band diagram of core/shell CdSeTe/ZnS QDs has been designed that helps to analyze the PL spectra and their transformations at the bioconjugation. It is shown that the core in CdSeTe/ZnS QDs is complex and including the type II quantum well. The last fact permits to explain the nature of infrared (IR) optical transitions (1.55–1.60 eV) and the high energy PL band (1.88–1.94 eV) in the nonconjugated and bioconjugated QDs. A set of physical reasons has been analyzed with the aim to explain the transformation of PL spectra in bioconjugated QDs. Finally it is shown that two factors are responsible for the PL spectrum transformation at bioconjugation to charged antibodies: (i) the change of energy band profile in QDs and (ii) the shift of QD energy levels in the strong quantum confinement case. The effect of PL spectrum transformation is useful for the study of QD bioconjugation to specific antibodies and can be a powerful technique for early medical diagnostics.